Here are some videos demonstrating various set up procedures for configuring the Eurotherm 3200 controller.
Thanks for visiting our website. If we can be of any assistance to you, please give us a call: (205) 988-5842.
Quick Start on a Eurotherm 3200 Controller
If the controller has not previously been configured it will start up showing the ‘Quick Configuration’ codes. This is a built in tool which enables you to configure the input type and range, the output functions and the display format.
If you need to re-enter the ‘Quick Configuration’ mode this can always be done by powering down the
controller, holding down the home button, and powering up the controller again.
You must then enter a passcode using the up or down buttons. In a new controller the passcode
defaults to 4. If an incorrect passcode is entered you must repeat the whole procedure.
Unboxing of the Eurotherm 3200 Controller
The following items are included in the box:
• Controller mounted in its sleeve
• Two panel retaining clips
• AN IP65 sealing gasket mounted on the sleeve
• Component packet containing a snubber for each relay output and a 2.49Ω resistor for
current inputs (see section 2)
Thermocouple Set Up on the Eurotherm 3200 Controller
Autotune Set Up on a Eurotherm 3200 Controller
Set Point Limitations on a Eurotherm 3200 Controller
Changing the Screen Display
Eurotherm single loop controllers provide you with high performance control that is simple to implement and easy to operate with quick start codes, automatic help text, custom text messages and auto-tuning.
These instruments provide precise temperature and process control with a host of advanced features heater failure detection, timer, setpoint programmer, and recipe feature.
Ideal for:
- Plastics – extrusion
- Heat treatment
- Hot runner
- Thermal forming
- Ovens & chillers
- Stress relieving
Features:
- 8 Segment programmer
- Heater failure detection
- Current monitoring
- Internal timer
- Scrolling text messages
- Recipes
- Modbus comms
- Modbus SP retransmission
- Analog retransmission
- Remote setpoint
- Help text
For more information on 3200 series controllers, please see the following links.
